Y81T-1250 Horizontal Push Out Type Automatic Metal Scrap Baler is capable of extruding various metal leftover,steel turnings, waste copper,aluminum,stainless steel, scrapped car body and other shapes of metals waste. It makes high density bales, like square, column,cylinder etc. different shapes are available.
By this way, the cost of transportation and burning loss can be reduced. It also makes efficient storage.
Horizontal Push Out Type Automatic Metal Scrap Baler is mainly used in steel plants,recycling yards,waste recovery and metal refining industry. Size of compression chamber and bale can be customized.
General parted design and compact design for different layout space. Operation can be manual operation and PLC automatic remote control.
1) Hydraulic drive, no need special foundataion
2) Compact design, no need to install
3) Pressing force ranges from 125T to 1000T
4) Customized bale & box size
5) Hardox steel for whole wearing plates
◆ Fe, Al, Cu, Cr-Ni Scraps
◆ Ferrous and non-ferrous
◆ Aluminium Extrusions, UBC, Profiles
◆ Rebars, Sheets, Buckets and other Mixed Scraps
Model | Main cylinder force (tons) | Feed box size (mm) | Bale size (mm) | Bale weight (kgs) | Capacity (ton/hour) | Power (kw) |
Y81T-1250A | 125 | 1200*700*600 | 250*250 | 45-60 | 0.6-0.9 | 15 |
Y81T-1250B | 125 | 1200*700*600 | 300*300 | 50-70 | 0.8-1.0 | 18.5 |
Y81T-1600A | 160 | 1600*1000*700 | 400*400 | 120-160 | 1.0-1.5 | 22 |
Y81T-1600B | 160 | 1600*1200*800 | 400*400 | 140-180 | 1.5-2.5 | 30 |
Y81T-2000A | 200 | 1800*400*900 | 400*400 | 150-250 | 2.0-3.5 | 37 |
Y81T-2500B | 250 | 2000*1400*900 | 500*500 | 250-350 | 3.0-5.0 | 44 |
Y81T-3150A | 315 | 2000*1750*1200 | 500*500 | 400-600 | 5.0-7.0 | 90 |
Y81T-4000 | 400 | 2600*2000*1200 | 600*600 | 600-800 | 7.0-9.0 | 90 |
One set Scrap Ferrous Metal Recycling Baler Machine can be loaded in one 20" GP container OR one 40"GP | ||||||
◆ No matter before or after deal, you will get 24 hours online service.
◆ Any needed machine parts can be supplied with professional guiding and competitive price.
◆ Engineer can be dispatched abroad for installation and maintenance or remote guidance by video.
◆ Due to quality issue, parts provided freely during warranty.
◆ With more than 10 years manufacturering experience, we provide consulting, product selection, design drawings, manufacturing, installation, training, maintenance and other technical support.
KLAY always pleased to receive your enquiries on metal & cable recycling machines. Rightest solution with reasonable cost proposal we'll provide.