Y81T-6300S Fully Automatic Scrap Steel Metal Baler Press is capable of extruding various metal waste,steel turnings and alloy, waste copper,aluminum profiles,stainless steel, scrapped car body and other shapes of metals scrap. It is customized model with small chamber box but big pressure, so it makes higher density bales even for some hard materials, square,octagon, cylinder different shapes are available.
By this way, the cost of transportation and burning loss can be reduced a lot. It also makes much efficient storage.
Fully Automatic Scrap Steel Metal Baler Press is mainly used in metal plants,recycling yards,waste recovery and metal refining industry. Size of compressing chamber and finished bale can be customized.
General parted design and compact design for different layout space. Operation can be manual operation and PLC automatic remote control.
1) Hydraulic drive, no need special foundataion
2) Compact design, installation free and less floor space
3) Pressing force ranges from 125T to 1000T
4) Customized bale & chamber box size
5) Hardox steel NM500 for whole wearing plate.
◆ Fe, Al, Cu, Cr-Ni Scraps
◆ Ferrous and non-ferrous
◆ Aluminium Extrusions, UBC, Profiles
◆ Rebars, Sheets, Buckets and other Mixed Scraps
Model | Main cylinder force (tons) | Feed box size (mm) | Bale size (mm) | Bale weight (kgs) | Capacity (ton/hour) | Power (kw) |
Y81T-6300S | 630 | 2500*2000*1400 | 600*600 | 400-600 | 7-9 | 135 |
Y81T-1250B | 125 | 1200*700*600 | 300*300 | 50-70 | 0.8-1.0 | 18.5 |
Y81T-1600A | 160 | 1600*1000*700 | 400*400 | 120-160 | 1.0-1.5 | 22 |
Y81T-1600B | 160 | 1600*1200*800 | 400*400 | 140-180 | 1.5-2.5 | 30 |
Y81T-2000A | 200 | 1800*400*900 | 400*400 | 150-250 | 2.0-3.5 | 37 |
Y81T-2500B | 250 | 2000*1400*900 | 500*500 | 250-350 | 3.0-5.0 | 44 |
Y81T-3150A | 315 | 2000*1750*1200 | 500*500 | 400-600 | 5.0-7.0 | 90 |
Y81T-4000 | 400 | 2600*2000*1200 | 600*600 | 600-800 | 7.0-9.0 | 90 |
One set Scrap Ferrous Metal Recycling Baler Machine can be loaded in one 20" GP container OR one 40"GP | ||||||
◆ No matter before or after deal, you will get 24 hours online service.
◆ Any needed machine parts can be supplied with professional guiding and competitive price.
◆ Engineer can be dispatched abroad for installation and maintenance or remote guidance by video.
◆ Due to quality issue, parts provided freely during warranty.
◆ With more than 10 years manufacturering experience, we provide consulting, product selection, design drawings, manufacturing, installation, training, maintenance and other technical support.